Now I Know, Medical Electronic Are Not That Simple....

Nice to meet you again......

Didn't realized its already week 3!! I met my supervisor Thursday before, and i show him the DIY PPG that i found on the internet. We had discuss about the DIY PPG. The cost is estimated around RM70.00. All of the components and the can be found as listed at table below.

Component for PPG	Vendor
MCP6004 IC	Online RS Component/jalan pasar
14 pin DIP socket	Jalan pasar
1k,150R,47k,5k potentionmeter,10k,680k,6.8k resistor	Jalan pasar
100nF,4.7uF	Jalan pasar
PCB	Jalan pasar
5 pin header	Jalan pasar
2n3904 transistor	Jalan pasar
Tcrt 1000 Reflective Optical Sensors	Online RS component/jalan pasar
3mm red led	Jalan pasar

But, i told my supervisor, that we can buy online for the complete PPG device which only cost 18 dollar. After few discussion, we found that there are disadvantages to buy things that we doesn't have experience about it. There are:-

• We don't know the output of the devices such as the sensitivity of it
• We don't know if modification of the circuit will effect too much of the circuit
• How long will the devices arrived at our place

Then, because of that matter, Sir Saiful Yusri suggest that to used the device that he used before for his students project. But, we have to wait around 2 weeks minimum for the device to be delivered. Though it is required 2 weeks, don't think that i'm on VACATION and not updating the blog...Will keep in touch in next blog..bye now...sleep..zzzzzZZZZzz

Wow!! Let's Get Started

Good Morning People,!!

The first study is about the Photoplethysmography (PPG). PPG is the devices that can measured beat rate of a person. Heart rate is the number of heartbeats per unit of time, typically expressed as beats per minute (bpm). So then, i have to study things that out of my major, which is about medication. What i search, due to individuals having a constant blood volume, one of the physiological ways to deliver more oxygen to an organ is to increase heart rate to permit blood to pass by the organ more often. Normal resting heart rates range from 60-100 bpm. Bradycardia is defined as a resting heart rate below 60 bpm. However, hearts rates from 50 to 60 bpm are common among healthy people and do not necessarily require special attention. Tachycardia is defined as a resting heart rate above 100 bpm, though persistent rest rates between 80-100 bpm, mainly is they are present during sleep maybe signs of hyperthyroidism or anemia.

This is just enough for my basic about health and medication, before developing heart beat rate devices that can view by smartphone via wirelessly. Then, i have to search the types of PPG that suitable to make it as Graphical User Interface for monitoring data in smartphone. Which the output from the PPG is send via wirelessly. 

Research have been made, i found that a DIY photoplethysmographic sensor for measuring heart rate is more easier and not using much budget. Therefor, future modification of the PPG is easy to be done since there are diagram which still can i study with my supervisor. For more information regarding the DIY PPG can be found here http://embedded-lab.com/blog/?p=5508... See you in the next blog... Thanks for reading my blog until the 3rd week.

Finally,Registered!!

Since I’m nearing the end of my studying year in this university, within this week, I have to start registered the topic for my final year project (FYP). The registration has to be made at fyp.bmi.unikl.edu.my website with my supervisor Sir Saiful Yusri in Communication Technology Section.

After registering the title, we had a short discussion about the project. There are as below:-

            i.        Discuss about the photoplethysmography (PPG) – heart beat monitoring device

           ii.        Discuss about how the output of the heart beat rate transferred to the smartphone

Then, I go back to my room, so I’ll go in to more detail on this because I have few knowledge about the medical electronic and communication devices since I am an electrical student. But basically, I found an interesting topic, because to develop android application is my hobby. I’ve developed some simple application before by using Java Development Kit. It is quite enjoyable because it is successful even it was simple program.

I’m just happy that my supervisor is really cool, this has relaxed me slightly, but I still have to get it done for my research for this semester before developing this device. Just decided to write a blog post to get me in to a writing mood, hopefully it will help!

Deciding My Final Year Project Title

Good Morning,

Actually, I am interested to develop things new that small but very useful for the community. Learning electrical course is just not enough to study as electrical student. I should learn about networking system, electronic and medical electronic as well to further my studies as a future engineer that link everything to create things that useful for community. This project is about Graphical User Interface which I used Smartphone to interface with the medical appliances.

Before I chose this project, I have been thinking to develop smart home power control which to control home appliances remotely from computer and smartphone. I chose Sir Saiful Yusri as my supervisor because he knows about the communication system and he had handled many projects about networking before. But then, when I met Sir Saiful Yusri to propose my project about smart home power control, he advised me to do the other project which I mentioned in first paragraph.

Then, we had discussion about it, research so far we have seen the heart beat monitoring but, the heart beat monitoring that used nowadays required us to monitor on the screen itself by the user itself. It is quite inconvenient because, the heart beat monitoring usually used by the old folks that hard to read and see the data.

That is why, to develop this device which is monitoring heart beat rate by using smartphone via wirelessly and can be view at anywhere, it is very convenient because, the viewer can be people from far away or the user itself.